TALK=T;RUN(1,1)
display
*
This example Q1 demonstrates the use of Copy-Rotate
option for BFC-type grid; it is used here to create
S-bend of a tube.
*
Set the grid type to BFC
Enter circle radius (default 0.25m); root=0.707*radius
Input data used in this example:
*
Define points A,B,C and D
Point A positioned at (0,0,0)
GSET(P,A,0,0,0)
Point B positioned at (0,radius,radius)
GSET(P,B,0,radius,radius)
Point C positioned at (0,radius*2,0)
GSET(P,C,0,radius*2,0)
Point D positioned at (0,radius,-radius)
*
Draw four arc lines (AB,BC,CD,DA) from A to D
to create a circle.
Lines AB&CD must have equal number of cells, as
well as lines BC&DA. Power is set to 1.0, ie. cells
are uniformly distributed.
Enter number of cells for AB(&CD) lines (default 5)
Arc AB (A-B) goes through point (0,radius-root,root)
GSET(L,AB,A,B,nab,1.0,ARC,0,radius-root,root)
Enter number of cells for BC(&DA) lines (default 5)
Arc BC (B-C) goes through point (0,radius+root,root)
GSET(L,BC,B,C,nbc,1.0,ARC,0,radius+root,root)
Arc CD (C-D) goes through point (0,radius+root,-root)
GSET(L,CD,C,D,nab,1.0,ARC,0,radius+root,-root)
Arc DA (D-A) goes through point (0,radius-root,-root)
*
Define frame ABCD (circle) which has corner points
A,B,C,D
*
Enter number of cells for I direction (default 20)
reference length 1 x radius*2 x radius*2.
*
Match grid plane I1 on frame ABCD using the
trans-finite method
*
Enter shifting distance; it will define a straight part
of the tube (default radius*4)
Copy planes with a distance (dx=shift,dy=0,dz=0), including
internal planes; internal planes are uniformly distributed,
hence power is set to 1.
*
Z axis located at X=shift, Y=-0.2 m, clock-wise by 90deg.(PI/2)
Include internal planes and distribute them uniformly.
*
Z axis located at X(axis)=shift+radius*2+0.4, Y=-0.2 m, anti-
clock-wise by 90deg.(PI/2). Include internal planes and
distribute them uniformly.
*
shifting it with a distance (shift,0,0), including internal
planes, uniformly distributed.
enddis
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(COPY-ROTATE_EXAMPLE:B540 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 1
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 20
XULAST =1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 5
YVLAST =0.5
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 5
ZWLAST =0.5
************************************************************
Group 6. Body-Fitted Coordinates
BFC = T ;NONORT = F
NCRT = -1
RSTGEO = F ;SAVGEO = F
UUP = F ;VUP = F ;WUP = F
NGEOM =CHAM
NAMXYZ =CHAM
ANGMIN =20.
DOMAIN( 1, 1, 1, 6, 1, 6)
* Set fixed sub-domain
FIXDOM( 1, 0, 0, 0, 0, 0, 0)
FIXDOM( 2, 0, 0, 0, 0, 0, 0)
FIXDOM( 3, 0, 0, 0, 0, 0, 0)
FIXDOM( 4, 0, 0, 0, 0, 0, 0)
FIXDOM( 5, 0, 0, 0, 0, 0, 0)
FIXDOM( 6, 0, 0, 0, 0, 0, 0)
FIXDOM( 7, 0, 0, 0, 0, 0, 0)
FIXDOM( 8, 0, 0, 0, 0, 0, 0)
FIXDOM( 9, 0, 0, 0, 0, 0, 0)
FIXDOM( 10, 0, 0, 0, 0, 0, 0)
LIJ = F ;LJK = T ;LIK = F
IMON = 1 ;JMON = 3 ;KMON = 3
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
No PATCHes yet used for this Group
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 1 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
************************************************************
Group 17. Relaxation
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP